Test and Certification Laboratories
A large number of test house companies exist in Europe which provide DECT testing and Type Approval services, including those listed below. Please e-mail DECTweb with details if you know of others which should be added to this list -there are many more ! Thank you.
BABT Product Service, Germany, Hong Kong, Japan,
Singapore, UK, US
Company website
Following a joint venture between BABT and TUV Product Service (www.tuvps.co.uk/home/telecoms/ ), BABT
Product Service offers a complete range of test and certification for telecommunications
customers across the world, including DECT Testing and Type Approvals service, including
dual mode DECT/GSM
Cetecom, Germany, France, Benelux, Spain
Company website
Cetecom undertake testing, type approval and certification for the conformity of DECT
products to CTR 6, CTR 10 and CTR 22, as well as testing to the EMC and Low Voltage
Directives. Cetecom is a Competent Body and Designated Laboratory, with offices in several
countries.
Comlab, Norway
Company website
Comlab
is
an
accredited
testhouse
for
telecommunications
and
radio
equipment
and
a
Notified
Body
for
the
R&TTE
Directive
and
the
EMC
directive.
Comlab
offers
short
lead-times
and
a
high
degree
of
flexibility.
Among
the
services
offered
are:
-Conformance
testing
for
DECT
to
TBR6,
TBR10
and
TBR22
-Conformance
testing
for
ISDN
Basic
Access
to
TBR
3
-PSTN
interface
testing
to
TBR37
-PSTN
general
acoustical
requirements
to
TBR38
-EMC
and
safety
testing
to
EN
301
489-6
and
EN60950
ECCT
(European
Communications
Consultancy
Team)
Company
Website
ECCT
(European
Communications
Consultancy
Team),
founded
in
1993
in
Eindhoven
the
Netherlands,
as
a
pre-qualification
house
for
Philips
Consumer
Electronics,
concentrated
on
testing
and
approbation
activities
for
telecom
terminal
equipment
in
the
European
countries.
In
1995
a
development
team
was
set
up,
consisting
of
engineers
who
had
many
years
of
experience
in
telecom
engineering
at
Philips
Semiconductors.
Since
that
time
we
have
built
up
a
lot
of
experience
with
DECT
developments.
Our
activities
are:
Development
-
Hardware
and
software
development
of
telecommunication
terminals,
such
as
cordless
telephones
(DECT,
CT0,
CT1),
digital
answering
machines,
Bluetooth
and
wireless
LAN
applications.
Testing
-
Inhouse
pre-qualification
and
guidance
through
the
electronic
and
acoustical
verification
process
(TBR6,TBR10,
TBR21,
TBR38,
TBR22,
EMC
and
safety
testing).
We
modify
and
adapt
equipment
such
that
it
passes
all
specification
parameters
in
case
of
failures.
Consultancy
-
in
the
areas
of
product
definition,
electronic
design
and
manufacturing.
Electronic Technology Systems
Company website
ETS Dr.Genz GmbH - accredited test house &
certification body
BZT - ETS Certification GmbH - notified body
ETS
provides
a
complete
solution
for
DECT
testing
and
certification:
- Testing according EN 301 406, TBR 10, TBR 21, TBR 22, TBR 38, I-CTR 37, including national annexes
- 2,4 GHz DECT testing (FCC approval)
- Regulatory testing according R&TTE directive (radio, emc, safety)
- R&TTE certification by our Notified Body
The ETS world-wide network consists of the head-quarters in Germany, several branch offices all over the world and test laboratories in Germany, Hong Kong, Japan and USA. Please take a look for our whole offers concerning GSM, GPRS, BLUETOOTH, general radio, EMC and safety.
Institute of Informatics & Telecommunications NCSR
"Demokritos", Greece
Company website
Conformance testing services for DECT
Mikes Product Service GmbH
Company website
MIKES PRODUCT SERVICE GmbH, a subsidiary of BABT Product Service, is an European
accredited EMC and Telecom laboratory which undertakes compliance tests on DECT products
according to CTR 6, CTR 10 and CTR 22. Also the applicable EMC and Safety tests can be
performed.
Telefication BV, Netherlands
Company website
Offers type approval testing to CTR / TBR 6, CTR / TBR 11, TBR 22, EMC and safety
testing.
Telelaboratoriet, Denmark
Company website
Offers testing to TBR 6 - DECT General Terminal Attachment
Requirements, TBR 10 - DECT Telephony Applications and TBR22 - DECT Generic Access
Profile. CAP testing also may be available by now
TUV Product Service
Company website
TUV Product Service has merged their telecom testing activities with BABT to form a
new joint veture company, BABT Product Service, see above
TUV Product Service Asia Ltd. provide full DECT approval testing in the Asia region. DECT standards like EN 301 406, TBR10, TBR22, TBR37, TBR38, EN 301 489-1/-6 (EMC) and EN 60950 (safety) can now be tested in-house. A certificate "Attestation of Conformity" under the R&TTE Directive 99/5/EC will be issued under TUV Product Service Munich and BABT when the requirements are met.